Picking up best speakers is a challenging task. Dali produce wide range of budget and premium speakers. You can choose them according to your requirements. We have added comparison of DALI Epikore 11 vs. DALI Epikore 9. This comparison makes you clear in decision.

DALI Epikore 11 vs. DALI Epikore 9 Comparison
We add most of features and specifications of these speakers. This comparison table shows the differences between these two devices.
Specification | DALI Epikore 11 | DALI Epikore 9 |
Type | 4½-way floorstanding loudspeaker | 4-way floorstanding loudspeaker |
Frequency Range (+/-3 dB) | 29 Hz – 34 kHz | 29 Hz – 34 kHz |
Sensitivity (2.83V/1m) | 89 dB | 88 dB |
Nominal Impedance | 4 ohms | 4 ohms |
Maximum SPL | 116 dB | Not specified |
Recommended Amplifier Power | 50 – 500 watts | 40 – 400 watts |
Crossover Frequencies | 170 Hz, 370 Hz, 3.1 kHz, 12.5 kHz | 370 Hz, 3.1 kHz, 12.5 kHz |
Crossover Principle | 4½-way (upper woofers at 170 Hz, lower woofers at 370 Hz, midrange to tweeter at 3.1 kHz, tweeter to ribbon at 12.5 kHz) | 4-way (woofers to midrange at 370 Hz, midrange to tweeter at 3.1 kHz, tweeter to ribbon at 12.5 kHz) |
High-Frequency Drivers | 1 x 35 mm soft dome tweeter, 1 x 10 x 55 mm planar magnetostatic ribbon tweeter (EVO-K Hybrid Tweeter) | 1 x 35 mm soft dome tweeter, 1 x 10 x 55 mm planar magnetostatic ribbon tweeter (EVO-K Hybrid Tweeter) |
Midrange Driver | 1 x 6½-inch (165 mm) paper and wood fibre cone with SMC Gen-2 and Clarity Cone Technology | 1 x 6½-inch (165 mm) paper and wood fibre cone with SMC Gen-2 and Clarity Cone Technology |
Low-Frequency Drivers | 4 x 8-inch (203 mm) paper and wood fibre cone woofers with SMC Gen-2 | 2 x 8-inch (203 mm) paper and wood fibre cone woofers with SMC Gen-2 |
Enclosure Type | Bass reflex (twin continuous-flare ports, each woofer pair in separate enclosure tuned to 24 Hz) | Bass reflex (continuous-flare ports) |
Bass Reflex Tuning Frequency | 24 Hz (for each woofer pair) | Not specified (likely similar due to shared woofer design) |
Connection Input | Bi-wire capable binding posts with oversized thumbscrews | Bi-wire capable binding posts with oversized thumbscrews |
Placement | Floorstanding, recommended distance from wall: 20 – 100 cm | Floorstanding, recommended distance from wall: 20 – 100 cm |
Dimensions (H x W x D) | 63” x 16.6” x 21.8” (1600 mm x 422 mm x 554 mm) | 51.6” x 16.6” x 21.8” (1310 mm x 422 mm x 554 mm) |
Weight (including grille) | 158.7 lb (75.6 kg) | 141.1 lb (64 kg) |
Finishes | High Gloss Black, High Gloss Walnut, High Gloss Maroon | High Gloss Black, High Gloss Walnut, High Gloss Maroon |
Cabinet Construction | Layered MDF, real wood veneer, piano-finish lacquer, heavily braced with bitumen pads | Layered MDF, real wood veneer, piano-finish lacquer, heavily braced with bitumen pads |
Driver Technology | – SMC Gen-2 (Soft Magnetic Compound) for reduced hysteresis, eddy currents, and distortion – Paper and wood fibre cones with Clarity Cone Technology for low weight and high stiffness – Titanium voice coil formers for bass and midrange drivers – EVO-K Hybrid Tweeter with no ferrofluid for reduced drag | – SMC Gen-2 (Soft Magnetic Compound) for reduced hysteresis, eddy currents, and distortion – Paper and wood fibre cones with Clarity Cone Technology for low weight and high stiffness – Titanium voice coil formers for bass and midrange drivers – EVO-K Hybrid Tweeter with no ferrofluid for reduced drag |
Crossover Components | SMC Gen-2 inductor cores, high-end capacitors and resistors | SMC Gen-2 inductor cores, high-end capacitors and resistors |
Outrigger Feet | Adjustable spike feet outriggers for stability | Adjustable spike feet outriggers for stability |
Price (per pair, USD) | $60,000 | $40,000 |
Room Size Suitability | Large listening spaces | Medium to large listening spaces |
Additional Features | – Four woofers split into two pairs with different crossover points (170 Hz for upper pair, 370 Hz for lower pair) to reduce floor reflection cancellations – Die-cast baffles for reduced cabinet resonance – Designed and built in Denmark | – Two woofers for more compact design compared to Epikore 11 – Die-cast baffles for reduced cabinet resonance – Designed and built in Denmark |
Technology Heritage | Incorporates technologies from DALI KORE flagship and EPICON series | Incorporates technologies from DALI KORE flagship and EPICON series |
Key Difference Between DALI Epikore 11 and DALI Epikore 9
- Driver Configuration: The Epikore 11 is a 4½-way design with four 8-inch woofers, while the Epikore 9 is a 4-way design with two 8-inch woofers, resulting in slightly less bass output but better suitability for smaller rooms.
- Size and Weight: The Epikore 11 is taller (63” vs. 51.6”) and heavier (158.7 lb vs. 141.1 lb), making the Epikore 9 more manageable for smaller spaces.
- Crossover Design: The Epikore 11 uses a 4½-way crossover with different low-pass filters for the upper (170 Hz) and lower (370 Hz) woofer pairs to optimize lower midrange performance and reduce floor reflection issues. The Epikore 9 has a simpler 4-way crossover with a single low-pass filter at 370 Hz for its woofers.
- Price: The Epikore 11 is priced at $60,000 per pair, while the Epikore 9 is $40,000 per pair, reflecting the reduced driver count and slightly simpler design.
- Bass Output: The Epikore 11’s additional woofers provide greater bass extension and impact, making it better suited for larger rooms, while the Epikore 9 is designed for medium to large spaces with slightly less bass emphasis.
Common Features of DALI Epikore 11 and DALI Epikore 9
- Both models use the same EVO-K Hybrid Tweeter (35 mm soft dome + 10 x 55 mm ribbon), 6½-inch midrange driver with Clarity Cone Technology, and 8-inch woofers with SMC Gen-2 technology.
- Both feature continuous-flare bass reflex ports, bi-wire capable binding posts, and high-gloss finishes (Black, Walnut, Maroon).
- Both incorporate trickle-down technologies from the DALI KORE flagship, including SMC Gen-2 for low distortion and Clarity Cone for enhanced driver performance.
- Both are hand-built in Denmark with premium materials like real wood veneer and piano-finish lacquer.
I hope this comparison helped you in making buying decision. You can choose between them according to your needs and budget.